ALMEMO               ALMEMO

Special Functions
Measuring ranges/Technical data
Measuring Intruments
Portable dataloggers and data acquisition systems
Software
Data Transmission & Networking
Temperature Sensors
Current Measurement
Humidity sensors
Tension and compression load cells

Moisture sensors
Air velociy sensors
pH, Redox & conductivity sensors
Gas concentration sensors
Pressure Transducers
Displacement
Tachometers, light sensors
Heat flow plates
Connectors & cable adaptors
Accessories

The patented ALMEMOŽ -connector contains a data medium (EE-PROM), in which all characteristic data of the connected sensors and peripherals is stored. When connecting or changing sensors, no settings at the instrument are necessary. Sensor faults are correctable in the connector. This means, simple sensors become high-precision measuring value transducers. Standard signals can be displayed in original size. An individual sensor designation allows a clear set-up of measuring instruments and avoids confusions. Combined sensors (e.g. temperature/humidity) are possible in only one connector. The programming can be protected by a graded locking.

You will not need new sensors for ALMEMOŽ - instruments!

For your own sensors we offer the suitable connector to be plugged on easily. ALMEMOŽ - connectors can be programmed without problems via keyboard, terminal or software. The data medium can be overwritten as often as you like.

ALMEMOŽ - instruments can be used universally!

There are more than 50 standard measuring ranges for the most various applications: temperature, humidity, air velocity, flow, heat flow, pressure, speed, frequency, resistance, current, voltage, force, strain gauge, distance, pH, Redox, conductivity, gas concentration, etc.

            •  Min/Max values are automatically stored.
            •   Averaging over single measurements, output cycle
                 or over the whole time of measurement.
            •   Limiting value monitoring Max and Min.
            •   Correction of measured values by zero point and
                 gain.
            •   Scaling with factor, base value, exponent and
                dimension.

ALMEMOŽ - instruments are nevertheless individual!

ALMEMOŽ - instruments automatically recognize the characteristic data of the attached sensor. Particular functions are activated not before the corresponding connector, interface cable or module is connected.

            •   Calculation of dew point, mixture ratio and
                 vapour pressure using humidity sensors.
            •   Compensation of the atmospheric pressure
                 using a psychrometer.
            •   Compensation of the temperature measuring the                   dynamic
                 pressure and using pH probes.
            •   Volume flow measurement using flow sensors with
                 entry of the cross section.

For special sensors, connectors with an integrated, matching connection are available.

            •   16 bit-AD-converter, digital linearisation and
                 calibration.
            •   Optimal reference junction compensation by
                 means of a precision thermistor in the socket
                 spring.
            •   Galvanic isolation of the measuring inputs by
                 means of photovoltaic relays.
            •   Galvanical isolation of power supply and
                 interfaces.

ALMEMOŽ - data acquisition adapts to your demands!

            •   Memory capacity of 25 000 up to 100 000 measured                   values.
            •   Measurements can be numbered for selective
                 output.
            •   Measuring point scan can be individually
                 programmable by measuring and output cycle,
                 output or storage of  measuring values or average
                 value selectable output of off-normal values with
                 limiting value monitoring.
            •   Start and stop of a measuring point scan can be                   controlled variably: via keyboard or interface, via
                 time of day and date, by limiting values or external
                 signals.

ALMEMOŽ - instruments can be connected to any peripheral!

Different peripherals can be connected to the output sockets of the measuring instruments. The interfaces are no longer integrated in the measuring instrument, but in the connecting cables. Automatic identification of output type, baud rate, transfer functions etc. Analog output to laboratory chart recorder with analog output module. Control of alarm modules by means of relay output cable. Digital data output with RS232 or Centronics interface module directly to printer or PC. Addressing and cascading in a network with simple cables to RS232 interface. Decentral data acquisition and remote scanning via modem without problems. Output format side-by-side and underneath one another or tabular for all spread sheet programs. Graphic display and evaluation of the measuring values with different AMR software packages.

ALMEMOŽ - instruments are easy to operate!

Unified operation by hand or via the serial interface. Sensors and output modules with ALMEMOŽ- connectors only need to be plugged on. Confusion and faulty measurements are impossible.

      The advantages of ALMEMOŽ:

            •   One measuring instrument for all measured
                variables with automatic sensor recognition;
            •   Simple operation; various sensors are adaptable;
            •   Even your own;
            •   Sensor corrections for high-precision
                measurements;
            •   All peripherals can be connected; flexible data
                 transmission;
            •   Local data acquisition network;
            •   Data evaluation with spread sheet.

Home        PRODUCTS                ALMEMO^Ž Meteorology                Industrial Temperature   

Infrared                 Calibration                 E-mail