Data acquisition system - up to 300 measuring channels

General Description:
Data acquisition system with own CPU for self-sufficient adminstration of several active measuring channel scanner modules and any external device. Up to 250 measuring channels can be acquired, adminstrated and stored even without a PC. The data memory of 520 kB can be expanded up to 2.4 MB. The CPU is equipped with 4 serial interfaces to the internal bus, 1 output for embedding in an external network, as well as 2 output sockets for data output and networking with other ALMEMOŽ instruments, additionally a Centronics-interface for a printer, e.g. to printout the programming or off-normal values. Operation is effected by means of the rotary switch and the keyboard. Two-line alphanumerical LCD-display for simultanious display of measured values and measurement functions.

Instrument functions:
Single and automatic measuring point scan and storing of measured values. Start and end of a measurement by means of keyboard, real-time clock and date, limiting values or external triggering. Measuring and output cycle selectable.
   For each measuring point:
     • output of off-normal values,
     • calculation of Min/Max/Avg values cyclically or over the whole measurement,
     • programming of limiting values,
     • zero point, base value, gain correction and factor.
Numbering of a series of measurements. Data output for printer underneath one another, side by side, or in table format for use in any spread-sheet program.

This unit offers enormous possibilities for data acquisition. To receive more information on the various possibilities and the different applications, contact us today!

{Back}