|
Thermocouples {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9020-FS |
NiCr-Ni (K) |
- 200.0 to 1370.0 |
0.1 K |
| ZA-9020-FS2* |
NiCr-Ni (K) |
- 200.0 to 1370.0 |
0.01 K |
| ZA-9020-FSN |
NiCroSil-Nisil (N) |
- 200.0 to 1300.0 |
0.1 K |
| ZA-9000-FSL |
Fe-CuNi (L) |
- 200.0 to 900.0 |
0.1 K |
| ZA-9000-FSJ |
Fe-CuNi (J) |
- 200.0 to 1000.0 |
0.1 K |
| ZA-9000-FSU |
Cu-CuNi (U) |
- 200.0 to 600.0 |
0.1 K |
| ZA-9000-FST |
Cu-CuNi (T) |
- 200.0 to 400.0 |
0.1 K |
| ZA-9000-FSS |
PtRh10-Pt (S) |
0.0 to 1760.0 |
0.1 K |
| ZA-9000-FSR |
PtRh13-Pt (R) |
0.0 to 1760.0 |
0.1 K |
| ZA-9000-FSB |
PtRh30-PtrH6 (B) |
400.0 to 1800.0 |
0.1 K |
| ZA-9007-FS |
AuFe-Cr |
- 270.0 to 60.0 |
0.1 K |
| * Special programming for ALMEMO®
instruments necessary. |
Pt100- Ni100-sensors {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9030-FS1 |
Pt100 4-wire |
- 200.0 to 850.0 |
0.1 K |
| ZA-9030-FS2 |
Pt100 4-wire |
- 200.00 to 400.0 |
0.01 K |
| ZA-9030-FS3* |
Pt1000 4-wire* |
- 200.0 to 850.0 |
0.1 K |
| ZA-9030-FS4* |
Pt1000 4-wire* |
- 200.0 to 400.0 |
0.01 K |
| ZA-9030-FS5 |
Ni100 |
- 60.0 to 240.0 |
0.1 K |
| ZA-9030-FS6* |
Ni1000* |
- 60.0 to 240.0 |
0.1 K |
| * Special programming for ALMEMO®
instruments necessary. |
Ntc sensors {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9040-FS |
Ntc type N |
- 50.0 to 125.0 |
0.01 K |
| ZA-9641-FS* |
Ntc YSI 400* |
- 50.0 to 125.0 |
0.01 K |
| * Special programming for ALMEMO®
instruments necessary. |
Voltage {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9000-FS0 |
55 mV DC |
- 10.0 to 55.0 |
1 µV |
| ZA-9000-FS1 |
26 mV DC |
- 26.0 to 26.0 |
1 µV |
| ZA-9000-FS2 |
260 mV DC |
- 260.0 to 260.0 |
0.01 mV |
| ZA-9000-FS3 |
2.6 V DC |
- 2.6 to 2.6 |
0.1 mV |
| ZA-9602-FS |
26 V DC (dividor 10:1) |
- 26.0 to 26.0 |
1 mV |
Current {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9601-FS1 |
32 mA DC |
- 32.0 to 32.0 |
1 mA |
| ZA-9601-FS2 |
4/20 mA DC (%) |
0 to 100% |
0.01% |
Resistance {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9003-FS |
Ohm |
0.00 to 500.0 |
0.01 W |
Difference-Millivolt with stable sensor
supply 5V/50mA {Top}
| Order No. |
Description |
| |
Type |
Measuring range(°C) |
Resolution |
| ZA-9050-FS0 |
55 mV DC |
-10.0 to 55.0 |
1 µV |
| ZA-9050-FS1 |
26 mV DC |
-26.0 to 26.0 |
1 µV |
| ZA-9050-FS2 |
260 mV DC |
-260.0 to 260.0 |
0.01 µV |
| ZA-9050-FS3 |
2.6 V DC |
-2.6 to 2.6 |
0.1 µV |
Force sensors with calibration resistance
{Top}
| Order No. |
Description |
| ZA-9612-FS |
-26.0 to 26.0 mV, U = 5 V
amplification factor 10 including switch for calibration resistance |
Extension
cables made of NiCr-Ni compensation lead {Top}
| Order No. |
Description |
| Extension cable made of
NiCr-Ni compensation lead, lenght up to 5 m as passive cable. |
| ZA-9020-VK2 |
Length 2 m (passive) |
| ZA-9020-VK4 |
Length 4 m (passive) |
| ZA-9020-VKL |
Longer cable (passive up to 5 m) per m
(replace L by length required) |
| ZA-9020-VKP |
Longer cable > 5 m, sensor-specific cables with
corrected ALMEMO®-connector
surcharge plus cable price per m (indicate L=length) |
| ZA-9020-VKP10 |
Length 10 m (active) |
Extension cables made
for other sensors {Top}
| Order No. |
Description |
| Extension cable made for other
sensors, lenght up to 5 m passive cable. |
| ZA-9060-VK2 |
Length 2 m (passive) |
| ZA-9060-VK4 |
Length 4 m (passive) |
| ZA-9060-VKL |
Longer cable (passive up to 5 m) per m (replace L by length
required) |
| ZA-9060-VKP |
Longer cable > 5 m
sensor-specific cables with corrected ALMEMO®-connector
surcharge plus cable price per m (indicate L=length) |
| ZA-9060-VKP10 |
Length 10 m (active) |
The total length between sensor and measuring instrument must NOT exceed 5 m.
Otherwise, communication with the data medium in the sensor connector will not be ensured.
For this reason, several extension cables can NOT be connected one after another. For
longer distances between sensor connector and measuring instrument the sensor cable itself
has to be extended (longer sensor cable on request).
10-fold MU-connector {Top}
| Order No. |
Description |
| ZA 5590 MU |
ALMEMO-10 fold-connector (64pol.) with EEPROM-memory
for sensor parameters to connect 10 sensors and 2 alarm devices, no sensor supply
possible. Not for sensors requiring a special matching electronics (e.g. 26V, AC-voltage,
mA, humidity sensors, rotating vane anemometers, frequency, pulses, rotational speed)
pre-programmed connector on demand |
Adapter
cable for Volt AC, suitable for 50 Hz to 10 kHz {Top}
| Resolution: |
26 000 digit |
| Accuracy: |
±0.2% of final val. ± 0.5% of meas. val. (40Hz.2kHz sine),
±0.2% of final val. ± 0.5% of meas. val. (2kHz.10kHz sine,
signal < 10% of final val.) |
| Crest factor: |
3 (additional error 0.7%), 5 (additional error 2.5%) |
| Order No. |
Description |
| |
Measuring range |
Resolution |
| ZA-9603-AK1 |
0 to 260 mV AC |
0.01 mV |
| ZA-9603-AK2 |
0 to 2.6 V AC |
0.1 mV |
| ZA-9603-AK3 |
0 to 26 V AC |
1 mV |
CAUTION! DO NOT
feed voltages of more than 50 V
Frequency/pulse/speed {Top}
| Order No. |
Description |
| |
Type |
Measuring range |
Resolution |
| ZA-9909-AK1 |
Frequency |
0 to 25000 Hz |
1 Hz |
| ZA-9909-AK2 |
Pulse/cycles |
0 to 65000 lmp |
1 lmp |
| ZA-9909-AK3 |
Rotational speed |
8 to 32000 rpm |
1 rpm |
Adapter cable for
digital input signals {Top}
| Order No. |
Description |
| ZA-9000-EK |
For 2 digital signals each input, galv. sep. |
| ZA-9000-ES |
For 1 potential-free contact, not galv. sep. |
Adapter cable for
sensors with round connector {Top}
| Order No. |
Description |
| ALMEMO® adapter cable NiCr-Ni for
connection of NiCr-Ni measuring tips and NiCr-Ni sensors series THERM with round connector |
| ZA-9020-BK0 |
0.2 m |
| ZA-9020-BK1 |
1 m |
| ZA-9020-BK2 |
2 m |
| ZA-9020-BK4 |
4 m |
| ALMEMO® adapter cable to connect
other sensors with round connector to ALMEMO®- instruments upon request. |
Input cable for external
triggering {Top}
| Order No. |
Description |
| ZA-1000-ET |
Trigger input with push-button |
| ZA-1000-NT |
Input cable with push-button for zero alignment
(pressure modules, pH, etc.) |
Output cable for output contacs
{Top}
| Order No. |
Description |
| ZA 1000 EAK |
Trigger and alarm cable with 2 relays |
| ZA 1000 EGK |
Trigger and output cable with 2 relays |
Analog output cable {Top}
| Order No. |
Description |
| ZA-1601-RK |
0.1 mV/digit (-1.25 to 2.0 V), not galvanically
separated
accuracy: ±0.1%, ±0.5% mV, load > 10 kW
temperature deviation: 0.1 mV/K,
current consumption: approx. 3 mA |
Trigger-relay-adapter {Top}
General description:
Universal input/output-interface for all ALMEMO®-instruments with two output sockets.
With 4 mechanical output relays, 2 trigger inputs, galvanically separated analog output
(optional) and additional output socket for networking. Limiting value programming
(measured value alarm) for output relay triggering by means of interface commands or via
instruments.
| Technical data: |
| Alarm functions: |
by means of EEPOM-programming or ex-works
(Option A) |
| Control functions: |
switching state indicated by means of 4
LED’s |
| Relay triggering: |
configurable by means of jumper, beeper
when switched ON |
| Switching capacity: |
230V, max. 2 A |
| Analog output: |
Output signal: |
Gain: |
| Option R1 |
–1.2500 V … +2.0000 V |
0.1 mV/digit |
| Option R2 |
–6.0000 V … +10.0000 V |
0.5 mV/digit |
| Option R3 |
0.000 mA … +20.000 mA |
1 µA/digit |
| Power supply: |
8 to 12V DC (200mA),
12V mains adapter connector,
built-in PSU 230 V / AC (Option N). |
| Order No. |
Description |
| ZA 8000 RTA |
Trigger-relay adapter |
| Accessory: |
| ZB 3090 NA |
mains adapter connector 12 V DC/200 mA,
3 pol. miniature connector |
| Options: |
| OT 8000 N |
PSU 230 V / AC built-in, connecting cable |
| OT 8000 A |
variable relay triggering
for measured value alarm |
| OT 8000 H |
with hat rail fastening |
| OT 8000 L |
with bracket for wall or instrument mounting |
| OT 8000 R1 |
analog output -1,25 to 2 V galv. sep. |
| OT 8000 R2 |
analog output 0 – 10V galv. sep. |
| OT 8000 R3 |
analog output 0/4 – 20mA galv. sep. |
Programming module {Top}
| Order No. |
Description |
| Programming module (integrated in ALMEMO®
connector): |
| ZA-8990-PS |
for model 8990-8 to store the programming of a
sequence control (also pre-programmed upon request) |
| ZA-1000-PS |
for models 2290-2 and 2290-3 to enable entry
of programming parameters |
Averaging module {Top}
| Order No. |
Description |
| ZA-1000-MS |
Averaging module (integrated in ALMEMO®-conncector)
for models 2290-2 and 2290-3 to activate averaging functions |
Calibration adapter
cable, alignment set {Top}
| Order No. |
Description |
| ZA-9090-KS |
Alignment set for ALMEMO® instruments consisting of calibration
adapter cable model ZA-9090-AK, and calibration box model ZA-9060-KB, including
QM-instruction |
| ZA-9090-AKV |
Testing adapter cable with 4 banana plugs
for connection of sensors and 2 banana plugs
for sensors supply, 5V stable, 50 mA |
{ALMEMO® MAIN PAGE}{PRODUCTS} |
KAYTECK 
Thermocouples