Light sensors FL A613 UV

General description:
ALMEMOŽ UV-sensor for judgement of the UV-radiation. Display of measured values of the luminous intensity in W/m2

Measuring principle:
The UV-sensor contains a GaP-Diode with correction filter for the UV-range and a diffusor for adjustment to cos-characteristics (measurement of the luminous intensity or radiation capacity). The photometric current is converted to a voltage signal by means of an integrated transimpe-dance amplifier.

 

Specification
Measuring ranges: 0 to 87 W/m2, resolution 3mW/m2
Peak-wave-length: 366 nm
Detection limit: 3 mW/m2 at 366 nm
Basic accuracy:  5 % of measured value
Temperature coefficient:  0,25 %/°C

 

Order No. Description
FL A613 UV  UV-sensor with connection cable incl. works-calibration-certificate

 

{Back}