Carbon monoxide sensor for CO measurements in
air In garages for measuring and
warnings tested acc. VDI 2053. For air quality control reg. max. working place
concentration: e.g. in laboratories or motor testing stands. In homes and large shelters
for surveillance of air outside or protection air.
The sensor includes a chemical measuring cell into which the sample diffuses. At the
electrode the H+ -ions and the electrodes are used up in a cathode reaction. The power
generated between anode and cathode is directly proportional to the CO concentration in
the measured air.
| Specifications for FY A600-CO |
| Mearusing range |
0 to 300 ppm CO or 0 to 5% CO (50 000 ppm) other ranges upon request |
| Power supply |
from ALMEMO® instruments |
| Zero point error |
< 10 ppm CO |
| Gauge reading bal. |
< 3 ppm CO |
| Accuracy |
± 3% of final value |
| Zero point drift |
< 2% (1 year) |
| Repeatability |
< 2% (1 year) |
| Set time T90 |
< 60 s |
| Transverse sensitivity |
< 2% by integrated sensor |
| Ambiant temp. |
-10 to 40°C temperature compensated |
| Relative humidity |
0 to 99% non condensing |
| Durability |
approx. 2 years |
| Dimensions |
80 mm Ø 80 mm high |
| Weight |
600 g |
| Order No. |
Description |
| FY A600-CO |
Carbon monoxide sensor for CO measurements in air |
{Back} |