path_logo_small.gif (2918 bytes)KAYTECK
INSTRUMENTS
Moisture sensor

Materials
A list of materials is added to the moisture sensor, from which the corresponding group of material can be entered easily in the ALMEMO® instrument. For precise measurements a zero-point-correction is necessary, which is easily done by pressing a function key. The data of the material group are stored in the ALMEMO® connector and remain valid, if they are not changed.

Sensor
Building materials, wood and paper
    FH A696 MF
    FH A636 MF

Dew point detector
    FH A946 1

Humidity detector
    FH A936 WD

Dew point transmitter for measurements without ice
    formation
    MT 8716 DT1
    MT 8716 DT2

 

Recommended measuring instruments
ALMEMO® 2290-2 Universal indicating instrument, with this unit, the max values can be called.
ALMEMO® 2290-8 Universal datalogger for data acquisition and storing of measured values.

List of materials

Mineral building material Wood Paper
0 to 20%
0.1%		 0 to 50%
0.1%		 0 to 20%
0.1%
B1    Ytong

B2    Pumice stone, plastering,
        wall-tiles

B3    sand, cement, eternit slabs
        floor-tiles, anhydrtde-flooring

B4    waterproof screed, concrete

B5    marble

 H1    balsa   

H2    abachi, samba

H3    fir, gabun, ilomba, lauen,
         meranti-light, oregon,
         poplar, red-spine, spruce

H4    caroline pine, cedro, limba,
         lime- tree, chestnut, willow,
         cedar

H5    ash, beech, birch, elm cherry
         nut, pitch pine, red oak,
         ramin,sipo, teak, maple

H6    apple, pear, oak, padouk,
         meranti dark, merbau,
         multi-layer core chips
         zebrano

H7    hardboard, jarrah, keruing,
         makore, mahagony,
         red balau, wenge

H8    bongossi, cocobolo, ebony

 P1    filter paper, tissue paper

P2    semi-chemical pulp,
        creep-paper common paper
        tesltliner

P3    packing paper, corrugating
        paper

P4    kraft paper

P5    offset paper

 

{ALMEMO® MAIN PAGE}{PRODUCTS}