| Dew point transmitter for measurements without
ice formation 
Dew point transmitter with a 20mA current loop temperature output, cover of sintered
metal for sensor protection, body of probe and housing with integrated electronics sealed
against each other so that only the sensor with the cooling element is exposed to the
measuring medium.
Integrated sensor chip acc. to the CCC-dew-point principle after Heinze, mounted on an
miniature cooling element. A regulating circuit after the sensor unit regulates the
operation current of the cooling element so that it is adjusted to a defined state of
condensation. The corresponding dew point temperature is directly measured by the sensor
and is output in an evaluable form.
Dew point transmitter with intergrated sensor chip acc. to the CCC* dew point principle
for dew point measurements within a range of –10 °C to +70 °C (no formation of
ice).
| Specifications for MT 8716 DT1 |
| Measuring range: |
0°C to +70 °C (no formation of ice) |
| Drop in temperature: |
> 30 K |
| Measurement error: |
< 0,5 K. ±0,1 K |
| Response time: |
< 2 min |
| Temperature output: |
20 mA current loop with int. supply and galv seperation |
| Permissable burden: |
0 to 500 W |
| Supply voltage: |
12 V DC |
| Power input: |
max. 7 W |
| Storage temperature: |
–10 °C to +40 °C |
| Dimensions: |
Electronic housing: 125 x 75 x 57 mm
sensor diameter: 25 mm,
length of sensor tube: 170 to 200 mm |
| Cable run: |
PG7 |
| Weight: |
800g (at 170 mm length of sensor tube) |
| Order No. |
Description |
| MT 8716 DT1 |
Dew point transmitter with intergrated sensor chip. |
{Back} |