PC6

PRESSURE CALIBRATOR

The PC6 Pressure Calibrator combines the latest developments in pressure instrumentation with advanced sensor and component technology to offer a versatile calibration instrument.

It is designed for accurately testing and calibrating the following types of pressure measuring instruments:
• Pressure Transducers
• Pressure Transmitters
• Pressure Switches
• Pressure Relief Valves
• Analogue Instrumentation (Pressure Gauges)

The PC6 is supplied with our hand held test systems:
• TP1 Pneumatic pressure test system -1 to 25 bar
• HTP1 Hydraulic pressure test system to 700 bar

The compact size of the PC6 does not compromise functionality. It can simultaneously show pressure versus voltage, current, date & time, percentage of pressure, pressure switch status…

Features
•    Low cost, small and portable
•    Pressure measurement range -1 to 700 bar
•    Voltage and current measurement
•    Simultaneous display of pressure and selected function
•    Timed / Event data storage with date & time stamping
•    RS232 data communication link
•    Pressure switch test
•    Leak rate measurement 1 second to 999 days
•    Maximum and minimum pressure measurement
•    Display hold facility
•    Supply output for transducer / transmitter
•    Tare pressure offset values
•    Pressure module temperature measurement
•    Resolution variation facility
•    External pressure module (EPM) interchangeability for required pressure ranges
•    Windows based software “SiCal” for remote control operation and data transfer into many applications.
      (Optional)
•    ‘CE’ marked

 

DC

Input

Range 

Resolution

Accuracy

Input resistance

Voltage measurement

mV

 0 to 100 mV

1uV

0.05% FS

 > 1 MW

Current measurement

V
Auto-range
mA

o to 5 V
0 to 50 V
0 to 50 mA

0.1 mV
1mV
1uA

0.05% FS
0.05% FS
0.05% FS

>1 MW 
>1 MW
2W

The PC6 Indicator version does not include the Voltage/Current input/output or Switch functions.

 

Specifications for PC6
Pressure units: bar, Mpa, kPa, lb/in2, kg/cm2, atm, inH2O, mH2O, mmH2O, inHg, mmHg, unit1, unit2
(user defined)
Overload Warning: Flashing display and audible tone at
110% of FS
Temperature Display: Temperature of pressure sensor module
Voltage Output: Regulated DC supply 10V ± 0.1% max.
current 30 mA
Unregulated DC supply 18V ± 15% max. current 30 mA
Pressure Switch Test: Status OPEN/CLOSED
Operating Temperature: 0 to 40°C
Calibration Temperature: 20°C ± 2°C
Calibrated Temp. Range: 10 to 40°C
Storage Temperature: -20 to 70°C
RS232 Parameters: Baud rate 110, 300, 1200, 2400, 4800, 9600, stop bits 1 or 2 status ON or OFF
Zero Reset: Manual-Keyboard operation
Data Capacity: 176 records into a maximum of 20 files,
8k memory (additional 204 records,
8k memory option available)
Display: Backlit LCD, 16 characters X 2 line
alpha numeric
Pressure Media: Water, Oil, Non-corrosive gases
Humidity: 5 to 95% relative humidity non condensing
Resolution Select: Increase or decrease by a factor of 10
Power Supply: 6V rechargeable battery / mains operation
via charger (supplied)
Battery Life: 10 hours fully charged
Low Battery: Continuous check, audio and visual warning
Dimensions: 92 x 110 x 59 mm
Weight: 1.2 kg
Electrical Connections: Ground:                                      Standard 2 mm socket
Voltage / Current Input:              Standard 2 mm socket
Voltage Output:                          Standard 2 mm socket
Pressure Switch Input:                Standard 2 mm socket
Battery Charger:                         2-pole miniature round connector
RS232:                                      8-pole miniature round connector
EPM:                                        14-pole miniature round connector
Pressure Connection: 1/4” BSP male ‘quick-fit’ (Pneumatic)
3/8” BSP femal ‘quick-fit’ (Hydraulic)
Software (optional): ‘SICal’ will allow users to control the PC6 Calibrator remotely through a virtual instrument panel on the computer screen. The calibrator data can logged, viewed and printed in graphical format or on a calibration certificate.
System Requirements: 486 with maths coprocessor.
                                 Windows 3.1 or higher.

 

Order No.    Description
TP1-HI (DIGITAL GAUGE .05% KIT)
HTP1-HI (DIGITAL GAUGE .05% KIT)
TP1-PC6 (DIGITAL CAL .05% KIT)
HTP1-PC6 (DIGITAL CAL .05% KIT)
(For Indicators, the suffix ‘C’ is replaced with an ‘I’)

HTP1-KIT include: Pump, digital gauge 0.05% accuracy,                                7 piece adaptor set and seals,                                hydraulic hose assembler,1/4” BSP                                quick fit connection
TP1-KIT include:   Pneumatic pump, 0.05%
                              PC6I datalogging indicator,
                              hose plus 1/4” BSP swivel adaptor,
                              7 piece adaptor set,
                              plastic case and foams


    

 {back}