PULSAR

PORTABLE TEMPERATURE CALIBRATOR
- With microprocessor

Ö For thermocouples, RTDs and sensors
Ö Portable for on site or laboratory use
Ö For thermostat tests
Ö For thermic tests on sized metals
Ö Operating range from ambient to
    550°C

General Description
This versatile portable temperature calibrator is designed to obtain a controlled temperature with high stability, high uniformity in a range from ambient to 550°C (1000 0F) for temperature sensors calibration and thermostat control anywhere on site or in laboratory.
Pulsar provides easy and convenient calibration in chemical plants, refineries, power station and every industrial process manufactures according to ISO 9000. An internal PID microcontroller system allows man-machine communications with a front keyboard. The calibrator grants through a sophisticated temperature algorithm the temperature control with a power triac switch. On the built-in digital indicator the operator can read the set point value and the temperature value of the internal block through an inside class A Pt100 sensor or an outside probe located in an adapted hole. The regulation by forced circulation air enables the use of this oven without any problems of pollution (oil fumes…). The built-in digital indicator is a dot matrix 2 lines of 16 characters device equipped with backlight for easy reading.

The internal driven menu microprocessor allows different functions such as:
    selection of a programmable temperature cycle with temperature set point
     1,temperature set point 2 and increasing or decreasing rate in°C/min
    selection of the set point value and the internal block temperature
    memorisation of switch test on and switch test off for thermostat tests
    selection of external temperature probe reading on the 2nd display
    selection of the resolution 0.1°C or 0.01°C
    selection of the unit of measure in°C or °F
    selection of the internal parameters of the controller

{Back}