Temperature Sensors

NiCr-Ni (K), Pt100, NTC, Infrared

  Sensors
NiCr-Ni-sensor (type K) small/large handles
NiCr-Ni-jacketed thermocouples with cable
Pt100 & Ntc-sensors with small handles
Pt100-sensors without handle
Infrared sensor

Temperature measurement - more accurate with ALMEMO® connectors:

Temperature sensors with ALMEMO®-connector are adjustable. 
The correction values of the sensors can be stored inside the 
ALMEMO®-connector and so the measuring accuracy can be increased.

In our calibration certificates we respect the measured error and we program the correction value into the ALMEMO®-connector. In this way the highest accuracy can be achieved.

Thermocouples NiCr-Ni (K)

Accuracy: The thermocouple sensors delivered by our company correspond to DIN/IEC 584-2 (first class). The DIN standard allows a maximum deviation of ±2.5°C or 0.0075 x (ltl) in the range of -40 to +1200°C. The indicated Tmax - values refer to the tip of a sensor. Cables and handles are heat-resistant up to +90°C.

Temperature sensors Pt100 and NTC

Accuracy: We deliver Pt100 sensors class B according DIN/IEC 751. Class A or 1/5 DIN accuracy are available. The accuracy of our NTC sensors refers to statements of our suppliers (see table). The indicated Tmax - values refer to tip of the sensor. The cables and handles are heat resistant up to +90°C.

On request we deliver heat resistant silicone or teflon cables.

Accuracy
	Range	Max deviation
		Class B	Class A	1/5 DIN
Platinum sensors (Pt100 )	at -200°C and 200°C at -100°C and 100°C at 0°C  at 300°C  at 400°C	± 1.3°C ± 0.8°C ± 0.3°C ± 1.8°C ± 2.3°C	± 0.55°C ± 0.35°C ± 0.15°C ± 0.75°C ± 0.95°C	± 0.26°C ± 0.16°C ± 0.06°C ± 0.36°C ± 0.46°C
Thermistor (NTC) (10K at 25°C)	-20°C to 0°C 0°C to 70°C 70°C to 125°C		± 0.4°C ± 0.1°C ± 0.6°C

{ALMEMO^® MAIN PAGE}     {PRODUCTS}